Average Reviews:
(More customer reviews)Seems like it will be a nice bracket when I go to use it in about 3 days at a wedding.
I didn't realize that I had to buy another part to mount the camera on in addition to the platform on the Stroboframe itself, an "anti twist plate".That part was about $14 or so.Not bad. They do however include a cork piece that essentially does the same thing although not as well and a heavy camera will twist on the platform in which case you will need the metal anti twist plate so you might as well order it already when you get the Stroboframe.
What frustrated me the most (and hence the 4 rating) is when I did get the anti-twist plate and mounted it to the Stroboframe camera platform, the holes didn't line up properly when I attempted to put the camera, platform and anti-twist plate all together.Specifically, the camera body tripod hole was "up" about 1/8 inch or so from where the pre-drilled Stroboframe platform hole was.So being 3 days out from a wedding, I don't have time to write the company or return the bracket to them and wait while they look at the error.I actually had to get a drill and bore a new hole higher up on the platform slot.It wasn't hard for me to do necessarily but I shouldn't have had to do it at all.I think I probably voided my 5 year warranty also in doing so since I altered the frame.I'll be contacting the company about all of it.
To make this Bracket even better,there should be 2 extra holes drilled in it.These holes would be used to store two screws they provide to mount your camera and flash on the bracket when they are not in use.Basically, if you are not using your camera and flash on the bracket, these screws will have to be stored somewhere and eventually you will lose at least one of them.If there were holes on the bracket you could screw them into it and leave them there for the next time you use the Stroboframe.
Another thing I noticed right away is the bracket will have a little forward give if you have a camera with a telephoto zoom mounted on it.My telephoto is 2 lbs and the weight does bend the Stroboframe platform "down" a slight bit.Not a permanent bend but a "flex" downward slightly.So the bracket will have some give too it and not be hard rigid when holding a heavier camera.I'm using a Canon Rebel with a 70-200mm f4.0.
Ultimately, I like the frame and the concept of it.A great idea.I think after all my altering it will be a great tool for my photography.
Click Here to see more reviews about: Stroboframe Pro-RL Rotary Link Flash Bracket
Product Description:
The easy-to-use Pro-RL flash bracket lets you instantly rotate your camerafrom vertical to horizontal with a flick of the wrist, making it a versatile choice forprofessional photographers everywhere. The bracket is a breeze to adjust: simply twistthe knob with your free hand and lift the flash arm, which adjusts from 11 to 18 inchesabove the lens. Regardless of the height, the flash will remain centered directly over thelens for optimum lighting, so you needn't worry about poorly lit or blurry pictures. Inaddition, the bracket is supported comfortably with your left hand, leaving your righthand free to operate all camera and bracket controls. Other details include a finger- activated lock that secures the Pro-RL in the horizontal position; an exclusive one- handed TiltTrigger that lets you set the flash angle to any of 12 click-stop positions; aunique "kickstand" that pivots out to safely support and stabilize the bracket when it'sset on a table or floor; and solid machined components for optimum rigidity. The Pro-RL,which also excels on a tripod, is fully compatible with accessory battery packs or motordrives, and works with all Stroboframe flash mounts, anti-twist plates, and quick-releaseaccessories. Specifications include a bracket height of 14 inches and a net weight of 33ounces.
What's in the Box
Pro-RL bracket, 1/4"-20 mounting knobs for camera and flash, cork base pad.
Get 39% OFF
Want to read more honest consumer review about Stroboframe Pro-RL Rotary Link Flash Bracket now ?
0 comments:
Post a Comment